MOTM

Good point! :)


--- On Sat, 2/5/11, Dave Garfield <daveogarf@...> wrote:

From: Dave Garfield <daveogarf@...>
Subject: Re: [motm] Ramp wave on MOTM LFOs?
To: "MOTM" <motm@yahoogroups.com>
Date: Saturday, February 5, 2011, 8:23 PM







 



  


    
      
      
      Hi, all!
 
If I may be so bold as to step in where I'm not wanted:   ;->
 
* - As with most of the Western languages, we read from left to right
* - Therefore, if we consider that "standard", a RAMP wave would increase from left to right
* - A SAWTOOTH would be the opposite, decreasing from left to right
* - (Even though actual sawteeth rely on the ramp of the teeth to cut on the push stroke for Western saws [as opposed to say, a dozuki or ryoba], if you turn it the right way...  ;-)  )
* - There is a tremendous probability that I may be completely F.O.S.  This, however, is how I've discerned a SAW from a RAMP wave.
 
To use that tired old saw  ;->, YMMV.
 
Guess I need to find something to do...
Dave Garfield - Sittin' in the snow, in the "wilds" of Coloraddy, USA




From: Henrik <sequenrik@...>
To: Paul Schreiber <synth1@...>; motm@yahoogroups.com
Sent: Sat, February 5, 2011 12:06:12 PM
Subject: Re: [motm] Ramp wave on MOTM LFOs?

  





Yes, that´s a question to ask Oakley synths who uses the term "ramp" on their LFO ;)

//H

--- On Sat, 2/5/11, Paul Schreiber <synth1@...> wrote:


From: Paul Schreiber <synth1@...>
Subject: Re: [motm] Ramp wave on MOTM LFOs?
To: motm@yahoogroups.com, "Henrik" <sequenrik@...>
Date: Saturday, February 5, 2011, 7:10 PM


  


What is a ramp wave if not a saw?
 
Paul S.
 

----- Original Message ----- 
From: Henrik 
To: motm@...m 
Sent: Saturday, February 05, 2011 11:40 AM
Subject: [motm] Ramp wave on MOTM LFOs?





Hi, can the LFOs with the "shape" control make a ramp wave from the saw?

Thanks
//H