MOTM

Well, there's no way I can do the stuff you describe below. I am not  
even close to being a diy type person.

> Hi,
>
> First, make sure you mount the 990 board securely to your rack/ 
> cabinet/case.
> If your case is wood and thick enough, you might be able to use wood  
> screws
> but otherwise use nuts and bolts and lock washers etc. Make sure to  
> use 1/2"
> or longer standoffs/spacers (they are little plastic or metal tubes  
> that
> look like straight macaroni), don't just bolt/screw the 990 flat  
> against
> your rack surface!
>
> Then, probably the easiest way to connect the 990 adapter board to  
> the 950
> board is to use a MOTM 6 pin power cable. Cut one in half (or to  
> whatever
> length allows a comfortable reach) and strip a 1/4" or so of the  
> insulation
> off. Attach the stripped ends to the 990's screw terminals and then  
> just
> plug the other end into your 950.
>
> If you can look at Muff's forum I have some pictures in this thread  
> of a DIY
> power supply I build using a MOTM-990 as the main distro board. Not  
> the same
> thing you are doing but maybe it will give you some ideas! :-)
> http://www.muffwiggler.com/forum/viewtopic.php?t=2628
>
>
> Best of luck!
> John L Rice
>
>
>> -----Original Message-----
>> From: motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf Of
>> Ancient Eyeball Recipe
>> Sent: Saturday, April 10, 2010 8:33 AM
>> To: MOTM List
>> Subject: [motm] installing a 990 adapter board
>>
>> I'm really pretty clueless about this end of things, but in case this
>> question isn't too silly...
>>
>> I received my 990, and I don't have a clue as to how to connect it to
>> the 950. Obviously I'll need a cable of some sort, but then what do
>> people generally do - just lay it down horizontally or something?
>>
>> I really have no idea - I thought it would be self explanatory and
>> perhaps come with the necessary connectors, but I guess not.
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>