MOTM

The only differences I can see are:

91A1A-B24-B20L is conductive plastic, 3/4 inch shaft

95A1A-B28-A20L is cermet, 7/8 inch shaft

I use the 91A1A-B24-B20 all the time, I don't see why it wouldn't work  
for the 440, 830, and 300 (unless it needs to be soldered directly  
onto the PCB).

I just noticed that Allied also has the 91A1A-B28-B20 in stock  
(conductive plastic, 7/8 inch shaft). That's probably a better choice  
because then all your knobs will line up better (if your other pots  
are also 7/8 inch shaft that is).

On 10-Nov-09, at 10:37 AM, Argitoth wrote:

> Allied # 91A1A-B24-B20L will fulfill the 951A pot requirement called
> for in the MOTM-440? It's also called for in the MOTM-300 BOM as well
> as the 830 BOM.
>
> On Tue, Nov 10, 2009 at 11:24 AM, Argitoth <argitoth@...> wrote:
>> If you look at the MOTM-440 BOM, it needs 3 x 951A pots, that is
>> mouser # 652-95A1A-B28-A20, but mouser has little to no stock.
>>
>> Are you saying that Allied # 91A1A-B24-B20L is the equivalent?
>>
>> On Tue, Nov 10, 2009 at 11:06 AM, Scott Juskiw <scott@...>  
>> wrote:
>>> I'm not sure what you're looking for. If you want a Bourns 100K  
>>> linear pot,
>>> Allied has them, search for 91A1A-B24-B20L.
>>>
>>> On 10-Nov-09, at 12:33 AM, Argitoth wrote:
>>>
>>>> It looks like Digikey and Mouser both don't have a supply of 951A
>>>> pots. Can anyone suggest an alternate? I found this mouser part #
>>>> 652-3852A-282-104AL and digikey # 3852A-282-104AL-ND
>>>>
>>>
>>>
>>