MOTM

How about having a normaling switch installed on the front panel to "link"
2 or more multiples together. I still like the 2U wide panel though, This
way it is easier to see, at a glance which patch cords are patched together
( i.e they're in a straight line) vs having to count down in multiples of
2. Also one could easily turn 2 rows of 4 jacks into 6 connected jacks by
patching row 1 and 2 together -Nate


> From:
>"Tkacs, Ken" <Ken.Tkacs@...>
>
>
>
>
>If the problem with the normalized quad idea is that one might forget that
>
>the "key" jack is a normal and accidentally cut it off, a front panel
>
>graphic could help make that more clear. Even if it had solid lines
>
>connecting the first jack of each quad and then a dashed line from an upper
>
>quad to the normalized jack.
>
>
>
>If I get a second here I'll draw something up.
>
>
>
>One could also do two vertical rows of say 6 jacks each and ditch the
>
>normalization, but you lose some flexibility.
>
>
>  <http://adforce.imgis.com/?adlink|2.0|2|82045|1|1|misc=3250;loc=300;>
>Please click above to support our sponsor
>