MOTM

Hello,

Thanks for reminding that there is a troubleshooting section in the docs.
forgot about this.
Those Voltage measurements i have not done, but did now.
( i run my DIY-Euroformat with +-15V , so no problem here )


Measurements were fine, exept point f)
I have here 0,86V(CCW) to 0,62V !!(CW)which is REALLY wrong !
( In the meantime i built my Motm300 #4 which has for example 0.25V - 14,6V.)


#3 looks good when controlling by Eye, i can't see any wrong wiring, shortcuts or anything else.
Any more advice ? Paul ?


( i "replyed" two times allready but none of those posts came thru )

thanks, 
funky40