MOTM

thanks paul!

any chance someone has mouser#s for the 300 and 310 that they could post? 

for me, getting the right parts from mouser has been the biggest
challenge with building modules.  ics and caps are the most confusing,
i am not sure what i am looking at and there seem to be so many
variations. 

if anyone has anything they wouldn't mind sharing that would be most
appreciated!

thanks
patch     


--- In motm@yahoogroups.com, "Paul Schreiber" <synth1@...> wrote:
>
> Get this one:
> 
> 512-2N3904TF
> 
> Paul S.
> 
> 
> ----- Original Message ----- 
> From: "patchdub1972" <patchdub@...>
> To: <motm@yahoogroups.com>
> Sent: Friday, February 27, 2009 8:53 PM
> Subject: [motm] Re: Watch transistor pinouts!
> 
> 
> >i am just about to build a 300 and a 310 and i want to be sure to get
> > the right parts...   for the 2n3904 is the mouser #512-2N3904CTA? 
> > 
> > also anyone have the proper # for the ferrite bead?  i have seen a few
> > sizes now and am wondering which is the right one.
> > 
> > thanks
> > patch 
> > 
> > --- In motm@yahoogroups.com, Jason Proctor <jason@> wrote:
> >>
> >> fwiw, mouser lists 2n3904s with two different pinout
configurations - 
> >> the 2N3904CTA variant has the collector on the middle pin.
> >> 
> >> :-S
> >> 
> >> >*I* did not buy them, the customer used the dreaded 'surplus
store' in
> >> >Silicon Valley.
> >> >
> >> >Paul S.
> >> >/now understands today's meaning of 'surplus'
> >>
> > 
> > 
> > 
> > 
> > ------------------------------------
> > 
> > Yahoo! Groups Links
> > 
> > 
> > 
> >
>