MOTM

> The only bad thing about my mod is that the 1K resistor above R3 is not
> very mechanically secure.  I suppose a more professional approach would
> include a bit of shrink-fit tubing to cover up the resistor-to-wire
> "loop."

If you are a stickler for details or move your MOTM a lot, can use a little
blob of silicon RTV on R3 to hold the 1K in place, and secure the loose wire
by cable tying it to the other wires going to the trigger jack.

Dave Bradley
Principal Software Engineer
Engineering Animation, Inc.
daveb@...