MOTM

Received the first set of 15 MOTM-730 VC Divider production boards.

Every function checks out 100%!

There other 85 CPU boards will arrive ~ 1 week. I will be able next
week to ship the first 15 orders in the backlog for the '730. I will
type up a Owner's Manual this weekend, and I will post
the *binary* firmware files for the 2 PIC processors (one is in a socket
the other soldered into the board). The socketed IC is the main CPU
divide engine, the smaller soldered IC just drives the display. The PICs are
OTP (one-time programmable) so a dedicated programmer is needed
to replace them if one dies and I'm not available for a replacement :)

I do not expect these PICs to die anytime in the next 10 years or so.

The measured power supply current is:

+5V @ 75ma (no outputs driving). Add 4ma/driven (patched) output.
+15V @ 16ma
-15V @ 14ma

The outputs are 0 to +5V square waves for the dividers, and an analog 
'stepped'
sawtooth wave that steps in 4th/octaves/5ths.

All divider outputs can be used simultaneously, as long as your supply can 
handle
it. A MOTM-950 supply can handle 5 '730s, driving ALL the outputs from all 5
as well as a MOTM-650.

Paul S.