MOTM

I agree with Scott. I have two MOTM 410s and both of them operate as
expected when you turn the Depth knob to zero, i.e. there is no audible
change in frequencies of the filters.
 
--Adam


  _____  

From: motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf Of Scott
Juskiw
Sent: Thursday, February 05, 2009 10:01 AM
To: Aaron Day
Cc: MOTM List; Oakley Synths
Subject: Re: [motm] stopping LFO modulation on 410 + OMS 410



Yes, I think you have a problem there. I have two of the MOTM/OMS 410 
combos and both of them exhibit no change in frequency when the LFO 
depth pot drops below the 1.5 mark.

On 5-Feb-09, at 4:53 AM, Aaron Day wrote:

> Hi all,
>
> I am making an effort to re-discover my 410 + OMS 410.
>
> I just realized that on my unit there is no way to reduce LFO "depth"
> to zero i.e. when the rate and depth controls are set to "0" there is
> still a very slow sweep. This was never an issue for me in the past
> when I wanted constantly evolving motion from the unit but now it is.
>
> Ideally I'd like to control the 3 BPFs from the CV input of my OMS-410
> in a way that I can get reproducible settings.
>
> Is this behavior normal or is there a build error in my 410 or oms410?
>
> ad