MOTM

I re-setup my system.  The only MIDI clock multiplier I know is for 
the arpeggiator.  ARP1 is set to 1X and ARP2 is off.  I'm using the 
clock output from channel 1 (Aux=clock).

If I set the clock to internal at 120 bpm, I get clock pulses at 125 
mS, or 8/second, 480/minute.  At 4 clocks per quarter note, =120 BPM.

Now if I leave everything exactly the same, and set the clock to 
MIDI, and set my controller to 120 BPM, the clock is now 250 mS or 
1/2 the frequency. Shouldn't these be the same frequency?

I believe the 650 is dividing the MIDI clock 2X too much.

Somebody else please check this.  Am I missing a clock setting 
somewhere?

Dave

--- In motm@yahoogroups.com, Neil Bradley <nb@...> wrote:
> > 650 MIDI clock and external MIDI clock differ by 2X.  Would be
> > nice if someone else could verify this.  It's been so long since
> > I looked at this I don't remember if it's too fast or too slow.
> 
> Are you 100% sure that you didn't have MIDI clock multiplication
> turned on?
> 
> -->Neil