MOTM

If Paul does not come out with one soon, I would be happy to drill you one
up.  I just finished drilling the multiples for my ultimate wood case
system which each have 42 holes (24 MOTM units wide and 1/2 unit tall). 
The trick of course is getting them exactly straight.  Order yourself a
one-unit blank panel and ask Paul to ship it to me.  I assume you will take
care of jacks and wiring at your end.

Larry Hendry

----------
> From: Brousseau, Paul E (Paul) <PaulBr@...>
> To: 'motm@onelist.com'
> Subject: RE: [motm] Multiples
> Date: Sunday, January 23, 2000 2:53 PM
> 
> From: "Brousseau, Paul E (Paul)" <PaulBr@...>
> 
> Hmmm, that's not quite what I had in mind, more something that would go
into
> the MOTM spacing scheme.  I.E., 1U wide by 5U tall.  (I know, picky
> picky...)  But the Raxxess may turn out to be the good investment after
all.
> 
> --PBr
> 
> > -----Original Message-----
> > From:	Nathan Hunsicker [SMTP:nate@...]
> > Sent:	Sunday, January 23, 2000 12:24 PM
> > To:	motm@onelist.com
> > Subject:	Re: [motm] Multiples
> > 
> > From: Nathan Hunsicker <nate@...>
> > 
> > Raxxess make a 16 hole drilled rack panel (1U tall) with holes for 16
> > 1/4" jacks, I have used this panel and made for sets of 4 linked jacks
> > for exactly the purpose you stated. The panel costs about $7 and the
> > jacks and coax cost be another $16. It can all be assembled in less
than
> > an hour.
> > 
> > "Brousseau, Paul E (Paul)" wrote:
> > 
> > > From: "Brousseau, Paul E (Paul)" <PaulBr@...>
> > >
> > > Hello again (and welcome Thomas!)...  I'm wondering if it would take
> > > much
> > > effort to throw together a 1U multiple panel, similar to the 940 but
> > > without
> > > the jacks for other systems.  Just 4 4-way multiples.  Paul, you've
> > > already
> > > got blank 1U spacers, right?  All that would be left would to drill
> > > them
> > > correctly and spot in a bunch of switchcrafts and solder them
> > > together.
> > > Something like this would be terribly useful to me...  Unfortunately,
> > > I
> > > don't have a drill press, nor an arm steady enough to drill them
> > > myself (to
> > > satisfaction).
> > >
> > > Does anyone have the inclination to undertake the service of drilling
> > > some
> > > blanks?
> > 
> 
> --------------------------- ONElist Sponsor ----------------------------
> 
> Get great offers on top-notch products that match your interests!
> Sign up for eLerts at:
> <a href=" http://clickme.onelist.com/ad/elerts1 ">Click Here</a>
> 
> ------------------------------------------------------------------------
> 
>