MOTM

you are correct. there are 3 3280's. the 3320 was for the filter which
I have sold. so I still have the parts for the neural agonizer. thanks for the correction Enrico!

wes

--- On Sun, 11/23/08, edibennardo <endiendi@...> wrote:
From: edibennardo <endiendi@...>
Subject: [motm] Re: FOR SALE: Tellun Neural agonizer
To: motm@yahoogroups.com
Date: Sunday, November 23, 2008, 2:50 AM










    
            Hi, you probably have 3 x ca3280 (Scott used to provide those with 

the boards)but there's no cem 3320 in the neural agonizer if I'm not 

missing something.

Enrico Dibennardo



--- In motm@yahoogroups. com, hearts + horses <Wes@...> wrote:

>

> Hi, I have a ton of parts for the tellun corp neural agonizer. I 

have the panel made by bridechamber. both circuit boards from tellun 

corp.I also have the CEM3320. 2 brackets for the circuit boards and 

pretty much almost all the parts needed. I am missing a bunch of the 

100k resistors. I must have used them for something else. I have all 

the other resistors. I have all the capacitors, most of the 

semiconductors. all of them except the vactrols. I only have 5 of 

the spectrol 149 pots and only 5 of the switchcraft jacks. no dip 

sockets. no alco knobs, dont have all the screws and spacers, no 

wire, no coax cable, no solder, no heat shrink.  I do have all the 

other parts needed as far as I could tell by looking at the parts 

list. 

> 

> I DO NOT have the reverb tanks. 

> 

> some pictures here: 

> http://www.flickr. com/photos/ softestthing/ sets/72157609708 338787/

> 

> I don't know how much all the parts cost or anything. I guess make 

me an offer off list.

> 

> thank you.

> wes

>