MOTM

Hi, you probably have 3 x ca3280 (Scott used to provide those with 
the boards)but there's no cem 3320 in the neural agonizer if I'm not 
missing something.
Enrico Dibennardo



--- In motm@yahoogroups.com, hearts + horses <Wes@...> wrote:
>
> Hi, I have a ton of parts for the tellun corp neural agonizer. I 
have the panel made by bridechamber. both circuit boards from tellun 
corp.I also have the CEM3320. 2 brackets for the circuit boards and 
pretty much almost all the parts needed. I am missing a bunch of the 
100k resistors. I must have used them for something else. I have all 
the other resistors. I have all the capacitors, most of the 
semiconductors. all of them except the vactrols. I only have 5 of 
the spectrol 149 pots and only 5 of the switchcraft jacks. no dip 
sockets. no alco knobs, dont have all the screws and spacers, no 
wire, no coax cable, no solder, no heat shrink.  I do have all the 
other parts needed as far as I could tell by looking at the parts 
list. 
> 
> I DO NOT have the reverb tanks. 
> 
> some pictures here: 
> http://www.flickr.com/photos/softestthing/sets/72157609708338787/
> 
> I don't know how much all the parts cost or anything. I guess make 
me an offer off list.
> 
> thank you.
> wes
>