MOTM

Hi, I have a ton of parts for the tellun corp neural agonizer. I have the panel made by bridechamber. both circuit boards from tellun corp.I also have the CEM3320. 2 brackets for the circuit boards and pretty much almost all the parts needed. I am missing a bunch of the 100k resistors. I must have used them for something else. I have all the other resistors. I have all the capacitors, most of the semiconductors. all of them except the vactrols. I only have 5 of the spectrol 149 pots and only 5 of the switchcraft jacks. no dip sockets. no alco knobs, dont have all the screws and spacers, no wire, no coax cable, no solder, no heat shrink.  I do have all the other parts needed as far as I could tell by looking at the parts list. 

I DO NOT have the reverb tanks. 

some pictures here: 
http://www.flickr.com/photos/softestthing/sets/72157609708338787/

I don't know how much all the parts cost or anything. I guess make me an offer off list.

thank you.
wes