MOTM

I'm building the Jurgen Haible chorus and interpolating scanner into 
a 2U module.  The panel is very dense and I was trying to figure out 
the best way to mount the PCB.  I needed the PCB as far to the side 
as possible so came up with a bracket arrangement that clamps to the 
row of jacks.  It's basically a main bracket which screws to a short 
strip that sandwiches the jacks.  It's quite sturdy.  I thought I'd 
pass the tip along.  It will only work with a row of jacks but I have 
several modules built that way.

There's a photo at the bottom of
http://modularsynthesis.com/jhaible/jhscanner.htm

Dave