MOTM

I've also just used stainless allen head screws (mainly because I was 
using standard rack rails mounted horizontally and needed 10-32 with a 
small head) but even having the chrome-ish dots at the edges really 
helps demarcate the the different modules.

Dave M.

Dave Bradley wrote:
> 
> 
> 
> Other ideas proposed in days of yore on this forum:
> 
> - use stock machine screws, but get multicolored washers to place under them
> - use colored edging tape to help divide module borders and color code them.
> 
> Moe
> 
> 
> On Thu, Sep 18, 2008 at 12:34 AM, JohnLeightonRice <Drummer@... 
> <mailto:Drummer@...>> wrote:
> 
>     Inspired by this thread on Muff's forum
>     http://www.muffwiggler.com/forum/viewtopic.php?
>     t=1594&postdays=0&postorder=asc&start=15
>     <http://www.muffwiggler.com/forum/viewtopic.php?t=1594&postdays=0&postorder=asc&start=15>
>     I was toying with the idea of
>     using different colored screws in the top two mounting holes of each
>     module to better distinguish between similar looking modules that are
>     side by side, especially in dark and or fast paced live enviroments.
> 
>     I put the mockup picture in the photos section here in my folder.
> 
>     I keep thinking about it and I want to try it and just need to know the
>     thread size so I can shop around.  I haven't decided yet if I'll make
>     all similar modules the same color or just do alternating black screws
>     and one other color for every other module.
> 
>     Thanks!
> 
>     John L Rice
> 
> 
>     ------------------------------------
> 
>     Yahoo! Groups Links
> 
> 
>        (Yahoo! ID required)
> 
>        mailto:motm-fullfeatured@yahoogroups.com
>     <mailto:motm-fullfeatured@yahoogroups.com>
> 
> 
> 
> 
> 
> -- 
> Dave Bradley
> 
> 
> 
> -- 
> Dave Bradley
>