MOTM

Is the previously planned MOTM-810 *VC* EG (JH design,2 CV inputs, Velocity CV, Burst/
Cycle mode, SMT) cancelled?

Girts


--- In motm@...m, "Paul Schreiber" <synth1@...> wrote:
>
> After I ship the 18 or so MOTM-800 kits on order, and the 12 assembled ones, 
> I will be out of 1M log pots. The problem is (and always has been), that 
> these are never a stock item and so I have to order them as a custom. Which 
> is 16-18 WEEKS delivery and a 600pc minimum order. Sometimes they will 
> accept a 400pc order, but the last time I bought these was in Nov of 2005 
> and they made me take 600.
> 
> So, if after tomorrow calling and begging, if I can't get them to sell me 
> like 150 (which will last me at least 1 year) I am going to retire the 
> current design and switch over to an SMT version of the MOTM-1800 Frac EG 
> which *internally* has both CV control of all parameters and the 
> looping/burst stuff.
> 
> In order to be "form, fit and function" with the existing MOTM-800, these 
> fancy features will not be implemented. From the "outside" the function will 
> be exactly like the existing MOTM-800.
> 
> I can add all the fancy stuff, but that would go to a 2U wide module 
> (MOTM-810) to add the 2 extra jacks and the 4 extra pots (plus switch, 
> pushbutton and [gasp] LED).
> 
> You would figure a 1M log pot is not that 'rare' in the real world, but 
> distribution mostly stock is linear 1K, 5K, 10K and 50K. Even 100K linear 
> can be an issue to locate.
> 
> I will keep you posted on the Great Bourns Pot Hunt of 2008. The 100K linear 
> pots for all the other modules is not an issue, I have over 400 of those 
> sitting here :)
> 
> Paul S.
> reason #488 why stuff takes so long to ship
>