The smallest PowerOne that ‘should’ work is only about $50 (US$) as long as you need less than 400mA:
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=179-2306-ND
Also, some very helpful related info here from Richard Brewster:
http://pugix.com/synth/portable-rack-cabinets/
Best of luck!
John L Rice
PS – PLEASE understand, fear and respect AC current before attempting DIY power projects! Death awaits just a tiny stupid mistake away. (I’ve been REALLY lucky at least three times in my life . . . and I’m not generally stupid . . . unless it comes to credit cards . . .and especially women! ;-)
From:
motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf Of Stephen
Drake
Sent: Tuesday, August 19, 2008 7:06 PM
To: MOTM List
Subject: Re: [motm] Portable power
Or there's always the extreme
diy approach -
http://www.musicfromouterspace.com/analogsynth/WALLWARTSUPPLY/WALLWARTSUPPLY.php
This with one of Paul's distribution boards and you'd be in business.
Personally I'd rather be using Paul's 900 hardware than this however.
On Tue, Aug 19, 2008 at 12:19 PM, Matthew Hiscock <audio@...> wrote:
Perhaps this would do the trick?
Cheap, 240ma, +/-15v - I'd just have to deal with the 5-pin DIN in some way....
On 19-Aug-08, at 12:59 PM, Jonathan Snipes wrote:
What about the Dotcom QPS2:
could easily switch out the power connectors with the MTA 156 ...
-j
On Aug 19, 2008, at 9:49 AM, Paul Schreiber wrote:
a) I have never seen a +-15V regulated wall wart. I have seen +-12V (they
use a 5-pin DIN, a la MIDI). But this will not work with MOTM.
b) your best bet is to get a 5U tall case, put a MOTM-900 in there, and
leave it. Then, when needed, remove modules from
the studio and place in there.
Paul S.
__________________________________________________
--
------------------------------------------------------------------
Stephen Drake
sduck409@...
makeme1witheverything@...