MOTM

Yeah...

I don't have a 606 707 808...I was just hoping there was something in the MOTM and 
friends system that would help with the 24 pulse per.1/4 note problem.

Anything in the 650 that could help?

Dave



--- In motm@yahoogroups.com, David Moylan <dave@...> wrote:
>
> The 606 can act as a master and also put out pulses for the toms so you 
> can use it to clock a sequencer.  I haven't used the two simultaneously 
> but it should work in theory.
> 
> Dave
> 
> 
> Mark wrote:
> > 
> > 
> > 
> > I have a couple of TB-303's. It uses Roland Sync24, commonly known
> > as DIN sync, which is 24ppqn. It has sync in, but not sync out, so
> > it cannot be used as a master (unless you put the cable in half-way
> > which is mechanically unreliable). So you need something that can
> > generate both DIN sync and a sequencer clock. In my set-up that
> > would either be a Kenton Pro-4 synced to MIDI F8, or a TR-808 with
> > one of the trigger outputs programmed as a sequencer clock. There
> > are a number of other devices that generate both DIN sync and clock
> > pulses. If you don't care about being able to slave to MIDI, the
> > least expensive option is probably a TR-707, which sells for around
> > $100 (it has MIDI out but not MIDI in).
> > 
> > On 7/23/08, earthtodylan2000 put forth:
> >  >Hello,
> >  >
> >  > My fiend is going to loan me his TB-303 for an extended time
> >  >period. I was wondering if
> >  >anyone had any tips about how to use it with an MOTM system.
> >  >
> >  > I do understand that I can use the CV out and CV gate to add
> >  >additional voices/VCO's to mix
> >  >with the 303.
> >  >
> >  > What I want to do is actually clock the 303 to a sequencer or vice versa.
> >  >
> >  > I'm new to this sort of synthesizing and not hip to DIN inserts.
> >  >
> >  >Thanks,
> >  >
> >  >Dave
> > 
> >
>