MOTM

Things will pick up dramatically in MOTM-land after this week. My business 
travel will be put on hold
for almost 3 weeks. I will be able to start shipping and working on kits and 
assembled modules. I'm sorry
things have dragged here in March/April but I knew this was coming and not 
much I can do about it.

On a positive note, I have all the parts placed on the MOTM-730 VC divider 
CPU board and now I can
load in the netlist and start routing away :) I am hoping I can keep it to 4 
layers but it is quite dense and will not
be surprised if it is 6-layer like the '650 turned out (it is difficult to 
get +-15V routed all over and still have
room for all the signals). On boards of this nature I hand-route all of the 
analog signals and auto-route all
the digital ones and the +5V power/ground connections. The auto-router is 
blazing fast, I expect that the
digital signals (about 100 of them) will route in < 1 minute.

Paul S.