MOTM

If someone finds that article, could you please post it here so everyone can
see it.  I think it would be of great interest!

Thanks,
Todd

> This came up on Analog Heaven a few months ago. Go to
> www.midiwall.com/aharchives and search for "serge
> compressor"--this should turn
> up the discussion. I have not tried it yet, but it is a very good
> description of
> how a compressor works and how to make one with a serge modular.

> > a thought occured to me this morning - now am i stupid, or can
> you use an EG
> > & VCA in conjunction with an envelope follower and come up with
> a Compressor
> > application..?
> > put it this way i've been messing around with a drum loop
> putting it thru a
> > Korg MS-03 pitch to voltage convertor, and experimenting with the gate
> > outputs to the EG or the evnvelope outputs direct to the VCA -
> so far (and i
> > can't really be bothered today - as there's some serious eating
> to be done)
> > i've managed to emulate some of my favourite Eventide
> Omnipressor settings,
> > but not really been able to look at levels and ratios (which is yer bias
> > setting on the vca..?)
> >
> > which brings me onto - if this compression milarky is possible
> (in a serious
> > context, as opposed to wacky omnipressor messing around with
> dynamics), then
> > the MOTM envelope follower might do well to have features that
> would help in
> > this. at the moment i can only think of a course & fine level
> control, and a
> > direct out for the original signal
> >
> > ideas..? comments..? witty put downs..?
> >
> > cheers
> > paul b (now in need of more VCAs - bugger)
> >
> > >
>
> >
> --
>
>
> ========================================================================
> To UNSUBSCRIBE from this community, send an email to:
>   motm-unsubscribe@onelist.com
> and reply to the confirmation email we send you.
> ========================================================================
>