MOTM

Very nice, Adam!  I like it.

For log taper pots on mixer inputs I have used Bourns 652-51AAA-B28-D18, 
available from Mouser.  These are 50K, which substitute fine for most 
applications where 100K is specified.  A bit pricey at $9.12 each, though.

Richard Brewster
http://www.pugix.com

Adam Schabtach wrote:
> I just posted photos and some description of a module modification project I
> completed recently. I added an expansion panel to one of my MOTM-480
> filters. The panel provides independent access to all three outputs and both
> inputs of the two state-variable filters in the MOTM-480. The posting is on
> my site here: 
> http://studionebula.com/blog/diy-synths/motm-480-expansion-panel
> This project was inspired in part by Richard Brewster's total makeover of
> the MOTM-480, but is less extensive and hence less impressive. :-)
> --Adam
>
>
>