MOTM

There is a drawing of the rack cabinet on my site.
http://modularsynthesis.com/cabinet/DJB_rack_cabinet.pdf

It's a slant cabinet and the outside depth is 9" at the top and 11" 
at the bottom.  The expansion cabinet that sits on top is 9" deep.

There is a 0.25" back and the modules are set in 0.5" from the front 
so the internal depth is 8.25" at the top and 10.25" at the bottom.

The MOTM-900 power supply mounts in the rear so I have less depth in 
the lower right 2U.

Below the MOTM rails is 2U of standard rack space. Below that is a 1U 
blank panel with a master power switch.  This part of the rack is 
unusable because of the slant.

The rear is closed except for the bottom 2U so I can access the 
standard rack gear.

Dave

--- In motm@yahoogroups.com, Michael Zacherl <egroups@...> wrote:
> Hi Dave, very nice setup!
> 
> The 19" units on the left, what's their depth?
> 
>   Thanks, Michael.