MOTM

If you patch a control voltage into the RES jack, the RES pot acts as an input attenuator. 
The RES control is set for a 0 to +5V range for min to max resonance.

Girts

--- In motm@yahoogroups.com, "doctorvague" <phil-brown@...> wrote:
>
> Just acquired my first full-size MOTM module, a 440 filter. It sounds fantastic. I bought 
it 
> used and have no documantation on it. 2 questions:
> 
> 1) The resonance jack - when you plug into this does the res pot become an attenuator 
or...?
> any explanation appreciated.
> 
> 2) all the black PC-mounted pots are fine.
> All 3 panelmounted blue pots have considerable wiggle in the shaft and the freq (top) 
knob is 
> the worst. Are these just worn out and need replacing, or is this the nature of these? I'll 
> replace them either way as I'm not digging the shaft wiggle at all. Again, any advice 
> appreciated.
> 
> TIA
> Phil
>