Not the 830, but that's because it divides down the inputs according to the documentation. So if you put 3x10 volt signals, the output is at most 12v with all of the knobs on the subsection turned up. This is all from memory, though... I don't have the docs with me at the moment.
cheers,
eric f
John Mahoney wrote:
John Mahoney wrote:
At 08:14 AM 7/18/2007, chad_kettering wrote:
>I think anyone could get around the second FM jack/knob by just using
>another mixer and sending this mix into the 1V/OCT jack if one wants
>to blend two CV sources into controlling the VCO. [snip]
In theory, that's right. In practice, it is easier said than done,
requiring a mixer with accurate unity gain for all inputs.
Are MOTM mixers calibrated accurately enough to maintain pitch
tracking? (Dare I ask?! ;-)
--
john
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.476 / Virus Database: 269.10.8/906 - Release Date: 7/17/2007 6:30 PM