MOTM

> From: Dave Bradley <daveb@...>
> A large nutdriver is needed to tighten down
> the nuts securing pots to the front panel.

Pot retaining and switchcraft 1/4 jack require 1/2" nutdriver.  All keeper
nuts require 5/16".  These two nutdrivers stay with my MOTM assembly tool
tray.  The rest of the $19.95 Craftsman set stays in the tool box.
 
> As for lead-bending tools, a manly man has been known to just use needle
> nose pliers and a good eye.

I have never used a jig either.  I find it plenty quick to bend them with
my fingers and a good eye as Dave said.

Stooge Larry