MOTM

Everything is in totally excellent cosmetic, electronic, and
mechanical condition, unless noted otherwise.


MOTM-110  VCA/Ring Modulator                   $320
This discontinued module, using a rare CEM chip, is no longer
available from Synthesis Technology.  It has two independent
sections.  The VCA section has a unique reversible gain control.  The
balanced modulator section, with AC/DC coupling switches and level
knobs for both inputs, can be used as a second VCA for audio or to
control modulation depth.  While it has many more features than the
smaller MOTM-190, I'm selling mine because I'm tight on space, and
have other signal multiplying gear.
http://www.synthtech.com/motm110.html


MOTM-700  Dual Voltage-Controlled Router      $250
Soon to be discontinued, some consider this to be an extremely useful
and unique module.  Extremely well-designed, each independent section
works with either audio or critical DC voltages, is bidirectional,
and can even switch at audio rates.  With its four LED's, it's also
fun to watch.
http://www.synthtech.com/motm700.html


Stooge 320R panel and Tellun DB-320 PCB        $70
These parts, for a series of MOTM-320 modifications, are unused, and
no longer available.  Not that Scott and Larry didn't do a great job,
but after thinking things through, I've decided that I will modify a
second MOTM-320, that I bought used, by changing its cap to a smaller
value.  The panel is already drilled, and ready to go.
http://www.tellun.com/motm/diy/db320/DB-320.html


Curtis CEM3340  VCO IC                         $45  (each)
Three available, these are rare "white dot" CEM3340's that were
hand-selected by Roland for use in the the SH-101.  Not all CEM3340's
are reported to work properly in that application.  According to the
Synthesis Technology website, "these will work in any synth, even
MemoryMoogs (not the 8226 date code)."  Two are labeled "CEM 3340
2466E-01 8304".  One is labeled "CEM 3340 8651 2466G-01".


Curtis CEM3394 IC                              $35
Only one available, this contains one entire synth voice (VCO, VCA,
VCF, etc.) on a single chip.  It was used in the SCI Six Trak, a
synth I no longer own.  It is labeled "CEM 3394 8513 3264"


Pearl Analog Delay AD-33                       $250
This is not a Pearl AD-08.  This is rare and unique BBD delay pedal
that has two sets of delay time and feedback controls.  It can switch
back and forth between these two sets of knobs from footswitch.  It
also has a feature that I have not seen on any other pedal.  It has a
TRS footswitch input.  Why would it have a "Foot Sw" jack if it
already has footswitches??  I have no idea, that jack allows it to be
controlled with a sequencer or drum machine!!  It has input level and
delay level controls, and separate outputs for direct and effect
using a switched jack. It has two pedal switches (effect on/off,
I<->II), six knobs, 3 LED's, and 4 jacks.  It has a few scratches,
and the footswitches could use a good cleaning (I used the jack).


DBX 172 Supergate                              $300
This is a two channel expander/ducker/gate that's packed with
features.  With its switchable Transient Capture Mode it is a
look-ahead analogue gate!!  Which I doubt you will anyone manufacture
ever again.  It has a key filter with adjustable frequency and
bandwidth, a one shot mode with adjustable hold time, an expander
with adjustable ratio, and controls for attack, release, threshold,
and depth.  It's great for live sound, as it has LED level meters,
and LED indicators for everything, but since I bought this one new,
it hasn't left a smoke-free studio.  Balanced XLR in and out, with
balanced TRS key inputs.  Includes original box and manual and
schematics.


Opcode Studio 5LX                              $100
The Studio 5LX combines the functions of a MIDI interface, a MIDI
patchbay, SMPTE synchronizer, and MIDI processor, that once
programmed, can function as a stand-alone unit to route and process
MIDI data.  It has 15 MIDI inputs and outputs, for a total of 240
channels. Updated to the latest ROM.  It supposedly works with a USB
to serial port adapter, but I have not tested that application.
Includes original box, floppies, original ROM chip, and manuals.


I have pictures of the AD-33 and DBX-172.

Terms:  Prices negotiable in U.S. dollars. Pre-pay or Paypal.  Buyer
pays shipping.

I apologize if including the non-MOTM stuff is off-topic.