MOTM

I have daisy-chained two '995s successfully using an
extra 4-wire connector no problem (for more +/-15v
motm modules).  I would think that chaining a '995 to
a '960 would be the same thing.  If you're coming from
the dotcom PSU to the '995, then connecting via PWR-20
to the '960 (for more +/-15v motm module hookups) I
would think you'd be fine.

Hans



--- shari_en_jin <shari_en_jin@...> wrote:

> would it be possible to "daisy chain" a 960 board
> off of a 995 to get
> more outlets?  
> Breakdown:
> I'm running a cabinet full of MOTM modules off of a
> .COM QPS-1
> powersupply with a 995 board and I just need a few
> more 4-prong jacks.
> ?So can I simply get a 960 distro board and use a
> standard PWR-20
> cable as a jumper from the 995 to a connector on the
> 960?  I've got
> plenty of power supply left on the QPS-1 to power
> them all, it's
> really just a matter of a lack of jacks and it won't
> be long till I'd
> need more than a 2nd 995 and I really only need one
> 6 prong jack for
> my MOTM-650 MIDI interface...and maybe a cloud
> generator or a \ufffdSeq
> down the road...
> Thanks,
> Ti_
> 
> 
> 
> ------------------------ Yahoo! Groups Sponsor
> --------------------~--> 
> Check out the new improvements in Yahoo! Groups
> email.
>
http://us.click.yahoo.com/4It09A/fOaOAA/yQLSAA/VpLolB/TM
>
--------------------------------------------------------------------~->
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
> 
> 



 
____________________________________________________________________________________
Don't get soaked.  Take a quick peek at the forecast
with the Yahoo! Search weather shortcut.
http://tools.search.yahoo.com/shortcuts/#loc_weather