From: John Loffink
To: Doug Wellington ; MOTM litserv
Sent: Friday, January 12, 2007 8:08:02 AM
Subject: RE: [motm] Front Panel for Oscilloscope Velleman VPS10
Id put a 6 way selector on the bottom, with 6 jacks and 2 mults each so you can look at mutliple signals during a running patch. Mults are to pass the signal back through the MOTM chain.
John Loffink
The Microtonal Synthesis Web Site
http://www.microton al-synthesis. com
The Wavemakers Synthesizer Web Site
http://www.wavemake rs-synth. com
-----Original Message-----
From: motm@yahoogroups. com [mailto:motm@ yahoogroups. com] On Behalf Of Doug Wellington
Sent: Friday, January 12, 2007 7:59 AM
To: MOTM litserv
Subject: Re: [motm] Front Panel for Oscilloscope Velleman VPS10
On 1/12/07, Miguel Mendoza <miguel@filminteract ive.es> wrote:
Hello, anybody mounted an Oscilloscope Velleman VPS10 into a MOTM front panel? Any design or Stooge panel? Doepfer just did it and it seems interesting and even cheap.
Looks interesting, and at $169 for the scope, not too bad. Looks like it's 6.5" across, so it would take a 4U panel to mount it. Of course, it's only about 3.5" tall, so there'd be a lot of panel space above and/or below it. Hmmm, maybe a sideways Veeblefetzer would fit in a panel with it?
Doug
http://www.stoogepa nels.com
http://www.analogno tes.com
Never miss an email again!
Yahoo! Toolbar alerts you the instant new Mail arrives. Check it out.