MOTM

I'd put a 6 way selector on the bottom, with 6 jacks and 2 mults each so you
can look at mutliple signals during a running patch.  Mults are to pass the
signal back through the MOTM chain.

 

John Loffink

The Microtonal Synthesis Web Site

http://www.microtonal-synthesis.com

The Wavemakers Synthesizer Web Site

http://www.wavemakers-synth.com

 

-----Original Message-----
From: motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf Of Doug
Wellington
Sent: Friday, January 12, 2007 7:59 AM
To: MOTM litserv
Subject: Re: [motm] Front Panel for Oscilloscope Velleman VPS10

 

On 1/12/07, Miguel Mendoza <miguel@...> wrote:

Hello, anybody mounted an Oscilloscope Velleman VPS10 into a MOTM front
panel? Any design or Stooge panel? Doepfer just did it and it seems
interesting and even cheap.

http://www.vellemanusa.com/us/enu/product/view/?id=522077 

 

Looks interesting, and at $169 for the scope, not too bad.  Looks like it's
6.5" across, so it would take a 4U panel to mount it.  Of course, it's only
about 3.5" tall, so there'd be a lot of panel space above and/or below it.
Hmmm, maybe a sideways Veeblefetzer would fit in a panel with it?


Doug

http://www.stoogepanels.com  <http://www.stoogepanels.com> 
http://www.analognotes.com