MOTM

I've posted pictures, user guide, and schematics for another of my 
MUUB-based utility modules. I've had this project built for a couple 
of months but it took forever to get the user guide written. This is 
about as complicated as I'd care to get for a MUUB project (7 boards 
and a whole mess of wires). Lots of work, but it works great, quite 
indespensible, IMHO. Look here for details:

http://www.tellun.com/motm/diy/tln861/TLN-861.html

I've run out of MUUB-4 boards but I have more on order. The new batch 
will be RoHS compliant. I've also got a new MUUB-3 board coming. This 
is the same size as the MUUB-4 but it has space for only one dual 
op-amp (like the MUUB-2) and the rest of the board is for general 
purpose use (like the old MOTM-000 board). I've got plans for more 
utility modules that require 14 and 16 pin chips. These  wouldn't fit 
onto the MUUB-2 and MUUB-4 boards so I needed a new board. I'll post 
more info around the end of November when I get them.