MOTM

DIY'ers check out Electronotes #108 for a panner-fader circuit (two 
inputs, two outputs, 1 CV) that uses only one VCA to do simultaneous 
cross fading and panning.  I've been considering doing a version of it 
with one of my MOTM protoboards (now unobtainium).  In the mean time I 
use a couple of modular VCA's.

Richard Brewster
http://www.pugix.com

(Just back from vacation in Italy and catching up on email.)

Scott Juskiw wrote:
>> there's a lack of VC panners around - the modcan one is expensive and
>> the serge one only arrives as part of a panel. my plan if the 130
>> isn't going to happen any time soon is to hack the Wilson autopanner.
>> but i'd like to see the MOTM one, and ideally build it...
>>
>> does everyone just use 2 VCAs then?
>>     
>
> Yes, two VCA's with the appropriate gain and control voltage offsets 
> so that an EG or bipolar LFO will cause a panning effect. I built a 
> bunch of VCAs using some SSM chips I had laying around, they work 
> nicely as VC panners:
>
> http://www.tellun.com/motm/diy/tln132/TLN-132.html
>
>
>
>