MOTM

I forgot to add ...
I later added a delay module so that one distribution board powers up 
immediately and the second distribution board powers up about 250 mS 
later.  That really helped with eliminating power supply crowbar with 
my quantity of modules. I used a 555 timer and some quality relays.  
Today I'd probably do it with an Atmel AVR processor.

http://www.modularsynthesis.com/modules/DJB-Power/djbpower.htm

Dave

--- In motm@yahoogroups.com, "djbrow54" <davebr@...> wrote:
> I mounted the power supply in the center of the cabinet on 1" risers 
> as far to the back as possible.  I put a distribution board on 
> either side of the cabinet so I can use the shorter cables to reach 
> any position within the cabinet.