MOTM

> 
> Anyone else have an issue with the default length of the power=20
> cables?=20=20
> 
> I currently have 2 19" rows of modules and the bottom of the case is=20
> about 2.5" lower than the lower rack rail to leave room for the power=20
> supply.  A cable from the top left or right going to the distribution=20
> board doesn't reach, so my distribution board sort of dangles in the=20
> air about 0.5" from the bottom.  (not safe)  I suppose if my make-
> shift cabinet had a back, I could mount the distribution board in the=20
> middle of the 2 rows.
 
I'm dealing with the same issue.  I have 2 rack cases of 3 rows of
modules in the works.  To save space in the front I want to mount the
PS in the back, but even though the rack isn't very deep very few modules
in the front will be close enough to the PS to be able to connect using 
the default wiring.

How is everyone else doing it on those big Synths Of Doom I keep seeing
in pictures?  Are you wiring your own extra-long cables?  Are you daisy
chaining extension connector blocks?

----------------------- Tear Along Dotted Line -----------------------
John Neilson                                           jneil@...

    this message brought to you by 'e-mail' -- safe, clean, Modern!