Hi Moe, and all others that have replied, On 12 Sep 2006, at 17:54, Dave Bradley wrote: > No, I've never shielded a cabinet or seen one shielded. Ok, that seems to be the general consensus here. Good to know. > At most, you may have to make sure that you don't have a sensitive > VCO board hanging right over the power transformer. Makes sense. There's a big antenna of a local police station visible from my home studio. Never had any problems with interference, and I've measured the field strength once with a borrowed meter. It was below 0.3 V/m across all frequencies. (My cell phone up close produces more noise...) Thanks, Ben
Message
Re: [motm] Cabinet shielding
2006-09-13 by Ben Stuyts
Attachments
- No local attachments were found for this message.