MOTM

There is no way to "beef up the size of, the power one transformer
that's in the 900?".  That, and it's not a transformer.  It's a power
supply.  Although a transformer is part of such a power supply.

I don't know if another Power One power supply with more current will
fit behind an MOTM 900.  Regardless, you have two options.  You can
entirely replace the supply you have now with a bigger one that will
power everything.  Or you can get another supply and use it to power
to some of your modules -- perhaps use the MOTM-900 to power your
MOTM modules, and the second supply to power your Milton and Blacet
modules.

What you do not want to do, is connect the the output of two separate
power supplies together.

7/25/06
>It's come to my attention that I need to upgrade my power supply.
>Upon hooking up my new milton sequencer for the first time
>yesterday, I got all the lights on my various modules coming on, but
>no sounds from my vcos. I disconnected a few modules, and everything
>that was left worked, so apparently I'm right on the edge of what's
>workable with this system. I've got about 20 modules hooked up now,
>all into a basic motm 900 power supply - there are
>several blacet modules in the mix, they each draw more than your
>average motm module, and the milton throws it all over the top.
>Anyway, I'm looking for a cheap/affordable alternative to getting a
>950, which I'll have to eventually get, but it's not on my immediate
>needs list. Is there a way to add on to, or beef up the size of, the
>power one transformer
>that's in the 900?
>
>Sorry if this has been covered here before, and I'm pretty sure it
>has - I'll look in the archives, but if anyone knows specific
>article names that'll help too.