Isn't there a module, either
in production or at the design stage, that does this sort of
interfacing?
Simon
Canberra
AUSTRALIA
AUSTRALIA
From: motm@yahoogroups.com on
behalf of ivancu@...
Sent: Thu 3/30/2006 6:36 AM
To: motm@yahoogroups.com
Subject: [motm] Re: How to connect balanced signals to the MOTM
Sent: Thu 3/30/2006 6:36 AM
To: motm@yahoogroups.com
Subject: [motm] Re: How to connect balanced signals to the MOTM
Don't use a direct box. Most direct boxes will
take a line-level input
and attenuate it to mic level. You WANT a high-level line input going
to the MOTM.
A balanced signal can drive an unbalanced input just fine, although you
might have some signal loss depending on the balanced output topology.
It should be minimal and not cause any problems though.
Ivan
and attenuate it to mic level. You WANT a high-level line input going
to the MOTM.
A balanced signal can drive an unbalanced input just fine, although you
might have some signal loss depending on the balanced output topology.
It should be minimal and not cause any problems though.
Ivan
-----------------------------------------------------------------------
This email, and any attachments, may be confidential and also privileged.
If you are not the intended recipient:
Please notify the sender and delete all copies of this transmission along with any attachments immediately.
You should not copy or use it for any purpose, nor disclose its contents to any other person.
-----------------------------------------------------------------------