MOTM

>It happens that the dual gate processor *could* be fitted into a
>"standard" MOTM panel with 4 normal size knobs, if you omitted the
>buttons or used small buttons.  Two LEDs can fit easily near the large
>knobs, and small pushbuttons could fit likewise.  Unfortunately this is
>not the case for most of Scott's new module ideas, which have more jacks
>and hence less room for standard knobs.

You're absolutely right. There are some mods to this circuit that 
would add a couple of toggle switches as well. Some people may choose 
to build this as a single gate processor with 2 normal size knobs, 2 
jacks, 1 pushbutton, 1 LED, and two toggle switches. I haven't made a 
panel layout for that configuration, but somebody might. I chose the 
denser layout because I'm running out of space, and I've already 
bought a few dozen of those huge pushbutton switches.