MOTM

It happens that the dual gate processor *could* be fitted into a 
"standard" MOTM panel with 4 normal size knobs, if you omitted the 
buttons or used small buttons.  Two LEDs can fit easily near the large 
knobs, and small pushbuttons could fit likewise.  Unfortunately this is 
not the case for most of Scott's new module ideas, which have more jacks 
and hence less room for standard knobs.

-Richard Brewster

http://www.pugix.com

john mahoney wrote:

>----- Original Message ----- 
>From: "Scott Juskiw"
>  
>
>>I got the prototype of my dual gate processor finished today. Thought
>>I'd share this preview image:
>>
>>http://www.tellun.com/motm/diy/tln866/preview.jpg
>>
>>No docs or schematics yet, that will come in March, but a preliminary
>>description can be found here:
>>
>>http://www.tellun.com/motm/diy/tln866/TLN-866.html
>>    
>>
>
>
>Nice modules, and I like the compact layout.
>
>I almost started a "do you like the smaller knobs" poll on this group the
>last time you brought up this layout, but I got bogged down trying to find
>the best way to frame the question.
>
>"So many knobs, so little front panel area."
>--
>john
>
>P.S. Thanks in advance for not making any "knob" jokes. ;-)
>
>
>  
>