MOTM

Isn't the easiest solution one of these?

http://www.cyndustries.com/modules_powerdist.cfm

John Loffink
The Microtonal Synthesis Web Site
http://www.microtonal-synthesis.com
The Wavemakers Synthesizer Web Site
http://www.wavemakers-synth.com


> -----Original Message-----
> From: motm@yahoogroups.com [mailto:motm@yahoogroups.com] On Behalf Of
> Carlos
> 
> I am trying to put some of my motm modules in a recently aquired
> modcan plan b cabinet with some extra spaces.
> 
> since the distro card on my system only has  modcan power connections,
> I am looking into converting a few of my motm to motm cables to modcan
> to motm power cables.
> 
> I figured taht basiclly I have to in one end switch the -15 v with the
> ground cable right next to the +15 and then somehow connect the
> remaining two oper connections together so that they both connect to
> the ground on the card and leaving the last connection in the cable
> unused, correct?
> 
> any way I can do this without soldering or ? havent mess around much
> with the ends of the cables...
>