MOTM

--- In motm@yahoogroups.com, Greg Amann <greg.amann@s...> wrote:
> 
> I personally would way rather see a 1U with the Tellun small pot  
> format and the crosstalk accessible.

Another possibility might be to use a pot with a slotted shaft (or a
high quality trim pot) and have a couple of small round holes on the
panel for the crosstalk trims.  (In other words, a small screwdriver
would be required to adjust the trims but you could do it from the
front panel.)  This should allow for a 1U panel with big knobs for the
more commonly tweaked controls.  The crosstalk inputs and outputs
would be jacks on the back side of the module and as such would be
semi-permanently patched.

This actually sounds like a pretty fun module.  I think I need some of
these too.

seth