MOTM

On Sunday 01 January 2006 13:54, John Loffink wrote:

> Cabinet #3 is 10 inches deep with an inset 1/4 inch back
> panel and front panels recessed ~.75 inches from the
> front.  Cabinet #1 was 8.5 inches deep and I found this
> was a tight fit for some of the Blacet conversions like
> the Miniwave and Time Machine which have deep PCBs.

Mine is also aprox. 8.5 inches deep, and I have the same 
problem. Did you mount the MOTM PSU in the back? Even with 
10 inches and the .75 inch resessed backpanel, I expect the 
power cable to stick too much out, so that I can't push the 
cabinet against the wall. And I want that for more 
stability. 

- Robert