MOTM

Thanks for the replies.  I moved some modules around some more and 
seemed to find a configuration that hasn't current limited yet.  I 
don't want to add another power supply as I'm limited for room.  I 
started designing a voltage sequencer but decided to monitor it for a 
while and see how it does.

Interestingly, though, I measured all four power supplies.  The one 
that current limits has the -15V coming up nearly 25 mS later than the 
+15V.  I put a photo in the DJB's System folder.  The one that current 
limits is the upper right. - Dave

--- In motm@yahoogroups.com, "djbrow54" <davebr@e...> wrote:
>
> I am running a single HAA15-0.8-A power supply in my middle cabinet 
> connected to two MOTM-960 distributions boards, one on each side.  I 
> have been having problems with the power supply current limiting on 
> power up.  My total load on this supply is 480 mA nearly balanced on 
> both +/- 15 volts.
> 
> What have others done to deal with this? - Dave