MOTM

hi,

i received a 950 construction manual pdf. so now everything is clear, 
the 950 works perfect
in 230 volt mode.

after finishing the 950 i did a testdrive on all my modules. everything 
works really fine, only the
480 cs filter sounds really strange ... maybe that module was to 
difficult for me ; (.

i can hear the input signal only (really quite) when taking it from the 
bp output. if i take it via lp ...
nothing. there is no reaction on the filter knobs ... ideas ?


richie



Am 14.11.2005 um 21:24 schrieb Sjaak:

> On 11/14/05, richard bartz <RICHARD@...> wrote:
>> hi,
>>
>> does somebody know if there is a manual for the 950 available ?. i 
>> only
>> received the power one manual and i not shure about wire-ing.
>>
> The wires you got will probally only fit in one possible way. (at
> least, this is the case
> for the '900) Inspect the sizes of the cableplugs and how they fit to
> their headers.
>
> The only thing you have to make sure, is you connect the AC source to
> the correct transformer lugs (pins), and wich of those pins you need
> to jumper. (see the note on the Power-One PSU chassis)
>
> Indeed, I faced the same "eh.."-moment, when my '900 arrived a little
> while ago. :)
> Good luck!
>
> Ciao,
> --
> +-------- - --  -
> | Sjaak Jobses <sjaak@...> ++ http://rxj.nl
> +---- - --- --  -- -
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>