MOTM

The MOTM power supplies (either 900 or 950) come mounted on a panel
measuring approximately 8.75" tall and 5.25" inches wide.  You can mount
that in the front or back of your dot com 22 space cabinet.  The dot com
cabinet has a 8.75" tall by 8.5 inch wide hole in the back for power supply
mounting.  The MOTM supply will fit with room left over.  You can screw it
right to the wood with the same kind of wood screws used to attach your dot
com modules.  You will need to drill pilot holes to reduce the risk of
splitting the wood.

If you want the flexibility of using machine screws for mounting MOTM
products in dot com cabinets, I sell some flat rails which make moving stuff
around very easy.  Here is some info:

http://www.wiseguysynth.com/larry/flatrail/flatrail.htm

and

http://www.wiseguysynth.com/larry/cabinet/dotcom/dotcom.htm

Drop me a note if you have questions
Stooge Larry


-----Original Message-----
From: motm@yahoogroups.com [mailto:motm@yahoogroups.com]On Behalf Of
brownchonald
Sent: Tuesday, October 04, 2005 4:11 PM
To: motm@yahoogroups.com
Subject: [motm] Mounting MOTM power supply in .Com cabinet?


I was curious how one would go about installing a MOTM power supply in
a synthesizers.com 22 space cabinet.

Cole