MOTM

ivancu@... schrieb:

>> Silly question - will the CV output of the panel be raw, non-quantized 
>> information?  I want to be able to use the CV out as a source of 
>> continous control voltages like the "old fashioned" ribbon controllers.

As far as I understand Scott's project: sure!
I'm using the original R2M hardware at the moment and I also have hope
that the "glitch-problem" will be ironed out with the more reliable
analouge path Scott's circuit provides. *)
I'm not a big fan of Doepfer hardware but unfortunately a Ribbon
Controller is not a widespread gadget  :-( 

 HTH, Michael.

*) My R2M's CV is not smooth. I can't see exactly what it is, I just
can hear it. A simple LP-Filter in the CV path eases this problem. I
got two examples I made to show:
First the VCF's frequency modulated by an LFO (4 ups) and then
manually by using the pressure sensor of the R2M:
http://bluemole.com/misc/r2m-glitches.mp3
Then with the filter hooked up. First out, then in:
http://bluemole.com/misc/r2m-glitches_filtered.mp3