MOTM

I noticed something odd about Dave's assembly photo of the 485.  If the 
jacks are labelled like they are in the catalog photo:  Left side top to 
bottom:  IN1, IN2, RES; right side top to bottom:  1V/OCT, FM, OUT, then 
the jacks are not wired correctly.  The photo show IN2 as wired to the 
top, right jack, and a twisted pair to the middle left jack.  
Accidentally reversed?

-Richard Brewster

djbrow54 wrote:

>Nice mods.  Certainly opens up the range of the Q Peak trimmer so
>you can adjust how 'gritty' you want the HP filter.  I'm running
>mine at about 30%.
>
>My module seemed to be sensitive to long power leads and being
>outside  of the cabinet without the bracket.  Seems a bit more
>behaved in the cabinet with the normal power cable so I'm thinking
>of opening up the Q Peak trimmer a bit more.
>
>Photo of the finished module at
>http://modularsynthesis.com/modules/motm/MOTM-485.jpg
>
>Dave
>
>--- In motm@yahoogroups.com, "Paul Schreiber" <synth1@a...> wrote:
>  
>
>>3) So, the following mods WILL increase the resonance (especially
>>in LP mode)
>>
>>R23 was 2K2, change to 1K2
>>
>>4) the following mod will allow a +5V signal into RES IN to
>>generate much more resonance
>>
>>R15 was 120K, change to 47K
>>    
>>
>
>  
>