Quick source of DC in a standard MOTM system:
Take the output of a spare MOTM-800 EG, unplug any Gate or Trigger
inputs, and vary the SUSTAIN knob - you'll get 0 to approx. 5 volts at
the output.
Plug that into a MOTM-830 mixer with reversible gain, and you now have
a nice buffered positive or negative DC offset voltage to apply
anywhere you want.
Moe
http://www.hotrodmotm.com
Take the output of a spare MOTM-800 EG, unplug any Gate or Trigger
inputs, and vary the SUSTAIN knob - you'll get 0 to approx. 5 volts at
the output.
Plug that into a MOTM-830 mixer with reversible gain, and you now have
a nice buffered positive or negative DC offset voltage to apply
anywhere you want.
Moe
http://www.hotrodmotm.com
--- In motm@yahoogroups.com, Greg Amann <greg.amann@s...> wrote:
> This is an apology for using bandwidth. I asked a question 2 days ago
> to which I had the solution already, but forgot. I have since built up
> my MOTM 830 and now a a CV source in the rig. Duuuuh...
>