MOTM

Thanks to both of you!

---Ken Tkacs

-----Original Message-----
From: Paul Schreiber
To: motm@onelist.com
Sent: 11/8/99 11:39 AM
Subject: Re: [motm] HELP! MOTM-800 Box Caps

From: "Paul Schreiber" <synth1@...>

>> I'm home from work building my modules today. I'm halfway through the
800
EG
>> and I'm stuck on the "yellow box caps." The manual says they should
be
>> marked "102" & "104" but mine are "1n0 J 63*" and "10n J 63*"
>
>  I'm not Paul, but here is how these codes work:
>
>  102 = 10 x 10^2  x 10^-12 = 1000 picofarads = 0.001 microfarads
>
>  104 = 10 x 10^4 x 10^-12 = 100,000 picofarads = 0.1 microfarads
>
>  1n0 = 1.0 "nanofarads" = 1 x 10^-9, = 1000 x 10^-12 = 0.001
microfarads
>
>  10n = 10 nanofarads = 10 x 10^-9 = 0.01 microfarads
>
>  100n = 100 nanofarads = 100 x 10^-9 = 0.1 microfarads
>
 In addition, the J means 5% tolerance and the 63 means 63VDC rated.
Crow is right, 1n = .001uf, 10n = 0.01uf, 100n = 0.1uf.

The nf is strictly a European thing.

Paul S.
remembers mmf (pre-picofarad)