MOTM

At 4:51 PM +0100 2005/03/09, Robert van der Kamp wrote:
>Hi,
>
>I'm building the '510 Wave warper and the manual tells me to
>save 3 resister leads. There's mention of the leads later
>on, saying they're needed to connect the jack's top lug
>with the beveled lug.
>
>What I can't find though is *which* jacks need this
>treatment. Is it for the Offset jacks?
>
>Thanks,
>Robert

A quick look at the schemo shows that all 6 input jacks have the 
switching lug connected to ground. But the intent was likely for just 
the 3 offset jacks to be switched to ground (since they have no pot 
that can be turned to zero to eliminate noise picked up on the jack).